If you're installing a dual reduction transfer case you are most likely going to have to modify the so called horse collar cross member in order for your driveshaft to clear. Here is a simple weld in cross member to replace the bulky stock cross member. It includes a weld on fuel tank mount. Due to variations in fuel tank height we provide the tank mount unwelded with extra material. This allows you to weld the mounting flange on at exactly the right height and angle of your tank based on body lifts and other modifications.

Available for 1983-1989 Pickups and 4 Runners. Cost $35

Notes:
Please indicate amount of body lift you have when ordering this cross member. If you have a body lift, but do not want this cross member to fight very tightly to the body then specify 0.0 body lift.

Additional modification is needed on truck with a carrier bearing.