When we set out to design a cross member we looked at what wheelers just like you wanted. This is the bad boy's toy we came up with. In order to meet the trail tough demands you'll place on this cross member we designed it to be of low profile but still protective.

Unlike any other transfer case mount this mount bolts to the frame with solid mounts. Due to the design, this actually helps stiffen your truck's frame, helping your entire truck hold together longer. Mounting the cross member this way allowed us to also provide a solid "skid plate" area that does not place skid type forces directly on your fragile transfer case or transmission housings. That's right this thing even helps protects your transmission housings!

So now that we have helped stiffen the frame and helped to protect the aluminum housings of your trans/transfer we still needed to mount the transfer case in a strong and low profile manner. Both of these ideas ruled out using a stock mount as many people rip them in two, and they are quite price. After some consideration it was chosen to use a design that houses two 1.5" round bushings. These bushings are mounted between the two main support tubes to keep the whole mount's profile as low as possible. All these things, combined with laser cut, CNC formed hardware, this is one hot cross member.

4 Runner Roll Cage Updates! In a continued effort to provide the best products available, 4x Innovations is proud to announce updates are complete to the line of 4 Runner internal roll cages. You can now get a cage that fits like a glove in full length, or front and rear passenger length. Click here to check it out!